Need a little more? Are you looking for a DI box that's not just great for the stage, but that also exploits the full sound potential of your instrument in the studio? The Palmer mosel is a DI box of uncompromising premium quality with useful additional features. Its active switching guarantees a particularly high input impedance for punchy, pure sound. The unbalanced, high impedance signal from magnet and piezo pickups is changed to a low impedance, balanced output signal with no loss of brilliance - even on longer cable runs. The Palmer mosel is also suitable for synthesisers and other electronic keyboards, since it is extraordinarily stable.
The output transformer - which offers galvanic separation to eliminate ground loops - can process studio levels of up to +20 dBu. In addition, the mosel is enclosed in Mu-metal to eliminate electromagnetic interference.
The Palmer mosel offers two extra special features: a variable pad (-10/20/30 dB) and a boost function (+12 dB). These features allow you to always achieve the optimal level for noise-free recordings. The mosel is also extemely practical because the unbalanced input exists not only in jack format, but also as XLR sockets. This makes unstable adapters unnecessary. The ground lift switch - to separate from ground lifts - also has a soft lift setting. Power for the mosel can be provided either by a 48V phantom power unit or a 9V battery.
The Palmer mosel is a high-end active DI box for studio use and demanding PA work. And for times when good is just not good enough! Choose the best - choose the mosel.
Balancing and impedance matching for guitar/bass/keyboards/synthesisers
Premium design: high headroom, low noise floor, ultra-efficient ground lift
Prevents humming through galvanic transformer isolation with Mu-metal shielding
Neutral sound thanks to active input stages with high impedance
THRU connection for passing the input signal to the amplifier
Handles even very high-level inputs without distortion
Variable pre-attenuation for high-level inputs plus a boost for weak signals
Power supply via 9V battery or 48V phantom power unit
Road-ready casing made of aluminium and steel plate
Incl. rewritable tour label for attachment on to the back of the mosel
Engineered in Germany
General
Type
Active
Included Accessories
Rubber feet, Tour label
Isolated transformer
Yes
Transformer Ratio
1:1
Ground Lift
Soft, Hard
On/Off switch
Yes
Frequency response (±1 dB, rel. 1 kHz)
20 - 20,000 Hz
Number of inputs
1
Number of outputs
1
Number of channels
1
Inputs
Input signal type
Unbalanced
Input connector types
XLR 3-pole female
Input connector types
6.3 mm Jack TS
Number of mic/line inputs
1
Number of instrument inputs
1
Max. input level (< 1% THD, rel. 20 Hz)
14 dBu
Max. input level (< 1% THD, rel. 1 kHz)
21 dBu
Input impedance
600 kΩ
Input padding
0 dB, 10 dB, 20 dB, 30 dB
Input gain
0 - 12 dB
Outputs
Output signal type
Balanced
Output connector types
XLR 3-pole male
Output impedance
83 Ω
Linked outputs per channel
1
Max. output level*
14 dBu
Signal processing
SNR (+4 dBu, 22 kHz BW, unity, unweighted)
113 dB
Max. THD+N (1 kHz, +4 dBu, unity, unweighted)
0.006 %
Max. THD+N (30 Hz, +4 dBu, unity, unweighted)
0.35 %
Max. IMD (SMPTE, 7 kHz, 4:1, +4 dBu)
0.0087 %
Max. IMD (SMPTE, 60 Hz, 4:1, +4 dBu)
0.0087 %
Mains operation
Operation voltage
48 V phantom power
Rated power
0.5 W
Battery operation
Battery type
9V block (6LR61)
Number of batteries needed
1
Built in battery tester
Yes
Housing
Chassis material
Aluminum continuous casting
Environmental
Ambient temperature
-20 - 70 °C
Maximum air humidity (non-condensing)
80 %
Dimensions & weight
Width
50 mm
Height
140 mm
Depth
128 mm
Weight
0.72 kg
Shipping & Returns
This product includes FREE SHIPPING Australia Wide and an easy 30 day return policy.
If you decide you want to return an item for any reason within 30 days you can send it back and receive a full refund of the purchase price, just pay the return shipping cost.
For additional information see our full Shipping and Returns policy by clickinghere.
Why Buy from Us?
With so many online retailers to choose from, we appreciate you considering Refiner Music. Here's what sets us apart:
FREE SHIPPING on purchases over $70 Australia Wide.
Price match guarantee. We provide the best online prices guaranteed.
30 day easy returns. Not happy with your purchase? We'll take it back, no questions asked.
We give back. 10% of Refiner Music's profits are donated to up and coming Australian artists in the music industry.
Australian owned and operated. Our mission as an Australian company is to get behind and grow the Australian music industry by not just supporting Australian brands, but Australian musicians alike.
Need a little more? Are you looking for a DI box that's not just great for the stage, but that also exploits the full sound potential of your instrument in the studio? The Palmer mosel is a DI box of uncompromising premium quality with useful additional features. Its active switching guarantees a particularly high input impedance for punchy, pure sound. The unbalanced, high impedance signal from magnet and piezo pickups is changed to a low impedance, balanced output signal with no loss of brilliance - even on longer cable runs. The Palmer mosel is also suitable for synthesisers and other electronic keyboards, since it is extraordinarily stable.
The output transformer - which offers galvanic separation to eliminate ground loops - can process studio levels of up to +20 dBu. In addition, the mosel is enclosed in Mu-metal to eliminate electromagnetic interference.
The Palmer mosel offers two extra special features: a variable pad (-10/20/30 dB) and a boost function (+12 dB). These features allow you to always achieve the optimal level for noise-free recordings. The mosel is also extemely practical because the unbalanced input exists not only in jack format, but also as XLR sockets. This makes unstable adapters unnecessary. The ground lift switch - to separate from ground lifts - also has a soft lift setting. Power for the mosel can be provided either by a 48V phantom power unit or a 9V battery.
The Palmer mosel is a high-end active DI box for studio use and demanding PA work. And for times when good is just not good enough! Choose the best - choose the mosel.
Balancing and impedance matching for guitar/bass/keyboards/synthesisers
Premium design: high headroom, low noise floor, ultra-efficient ground lift
Prevents humming through galvanic transformer isolation with Mu-metal shielding
Neutral sound thanks to active input stages with high impedance
THRU connection for passing the input signal to the amplifier
Handles even very high-level inputs without distortion
Variable pre-attenuation for high-level inputs plus a boost for weak signals
Power supply via 9V battery or 48V phantom power unit
Road-ready casing made of aluminium and steel plate
Incl. rewritable tour label for attachment on to the back of the mosel
Engineered in Germany
General
Type
Active
Included Accessories
Rubber feet, Tour label
Isolated transformer
Yes
Transformer Ratio
1:1
Ground Lift
Soft, Hard
On/Off switch
Yes
Frequency response (±1 dB, rel. 1 kHz)
20 - 20,000 Hz
Number of inputs
1
Number of outputs
1
Number of channels
1
Inputs
Input signal type
Unbalanced
Input connector types
XLR 3-pole female
Input connector types
6.3 mm Jack TS
Number of mic/line inputs
1
Number of instrument inputs
1
Max. input level (< 1% THD, rel. 20 Hz)
14 dBu
Max. input level (< 1% THD, rel. 1 kHz)
21 dBu
Input impedance
600 kΩ
Input padding
0 dB, 10 dB, 20 dB, 30 dB
Input gain
0 - 12 dB
Outputs
Output signal type
Balanced
Output connector types
XLR 3-pole male
Output impedance
83 Ω
Linked outputs per channel
1
Max. output level*
14 dBu
Signal processing
SNR (+4 dBu, 22 kHz BW, unity, unweighted)
113 dB
Max. THD+N (1 kHz, +4 dBu, unity, unweighted)
0.006 %
Max. THD+N (30 Hz, +4 dBu, unity, unweighted)
0.35 %
Max. IMD (SMPTE, 7 kHz, 4:1, +4 dBu)
0.0087 %
Max. IMD (SMPTE, 60 Hz, 4:1, +4 dBu)
0.0087 %
Mains operation
Operation voltage
48 V phantom power
Rated power
0.5 W
Battery operation
Battery type
9V block (6LR61)
Number of batteries needed
1
Built in battery tester
Yes
Housing
Chassis material
Aluminum continuous casting
Environmental
Ambient temperature
-20 - 70 °C
Maximum air humidity (non-condensing)
80 %
Dimensions & weight
Width
50 mm
Height
140 mm
Depth
128 mm
Weight
0.72 kg
Shipping & Returns
This product includes FREE SHIPPING Australia Wide and an easy 30 day return policy.
If you decide you want to return an item for any reason within 30 days you can send it back and receive a full refund of the purchase price, just pay the return shipping cost.
For additional information see our full Shipping and Returns policy by clickinghere.
Why Buy from Us?
With so many online retailers to choose from, we appreciate you considering Refiner Music. Here's what sets us apart:
FREE SHIPPING on purchases over $70 Australia Wide.
Price match guarantee. We provide the best online prices guaranteed.
30 day easy returns. Not happy with your purchase? We'll take it back, no questions asked.
We give back. 10% of Refiner Music's profits are donated to up and coming Australian artists in the music industry.
Australian owned and operated. Our mission as an Australian company is to get behind and grow the Australian music industry by not just supporting Australian brands, but Australian musicians alike.
